Problems with WEP

Wireless transmissions are inherently unsafe, as they allow wireless hackers (wardrivers) to access your data from a nearby parking lot. As most readers also know, the IEEE 802.11 standard includes basic protection, known as the Wired Equivalent Privacy (WEP) protocol. This protocol defines a set of instructions and rules by which wireless data can be transmitted over airwaves with added security.

The WEP protocol standardizes the production of hardware and software that use the IEEE 802.11 protocol. To secure data, WEP uses the RC4 algorithm to encrypt the packets of information as they are sent out from the access point or wireless network card. RC4 is a secure algorithm and should remain so for several years to come. However, in the case of WEP, it is the specific wireless implementation of the RC4 algorithm, not the algorithm itself, that is at fault.

The following section will show in detail how WEP is cracked. On a busy corporate network, a wardriver can capture enough data to break your WEP encryption in about two to six hours. Breaking a home user's encryption might take longer (up to two to four weeks), since the flux of data is often much lower. Nevertheless, we recommend that you use WEP when possible, not just as a minor security barrier, but also because it serves as a gentle warning (akin to a login banner disclaimer on a network) that your network is private, rather than shared with the entire community. Also, some products (such as Windows XP) automatically associate with the strongest wireless signal by default. Using WEP prevents your neighbors from inadvertently sucking up your bandwidth, or from unknowingly browsing the Web using your home IP address!

Securing Wireless Networks

How do wireless networks work?

As the name suggests, wireless networks, sometimes called WiFi, allow you to connect to the internet without relying on wires. If your home, office, airport, or even local coffee shop has a wireless connection, you can access the network from anywhere that is within that wireless area.

Wireless networks rely on radio waves rather than wires to connect computers to the internet. A transmitter, known as a wireless access point or gateway, is wired into an internet connection. This provides a "hotspot" that transmits the connectivity over radio waves. Hotspots have identifying information, including an item called an SSID (service set identifier), that allow computers to locate them. Computers that have a wireless card and have permission to access the wireless frequency can take advantage of the network connection. Some computers may automatically identify open wireless networks in a given area, while others may require that you locate and manually enter information such as the SSID.

What security threats are associated with wireless networks?

Because wireless networks do not require a wire between a computer and the internet connection, it is possible for attackers who are within range to hijack or intercept an unprotected connection. A practice known as wardriving involves individuals equipped with a computer, a wireless card, and a GPS device driving through areas in search of wireless networks and identifying the specific coordinates of a network location. This information is then usually posted online. Some individuals who participate in or take advantage of wardriving have malicious intent and could use this information to hijack your home wireless network or intercept the connection between your computer and a particular hotspot.

What can you do to minimize the risks to your wireless network?

• 
  Change default passwords - Most network devices, including wireless access points, are pre-configured with default administrator passwords to simplify setup. These default passwords are easily found online, so they don't provide any protection. Changing default passwords makes it harder for attackers to take control of the device (see Choosing and Protecting Passwords for more information).
• Restrict access - Only allow authorized users to access your network. Each piece of hardware connected to a network has a MAC (media access control) address. You can restrict or allow access to your network by filtering MAC addresses. Consult your user documentation to get specific information about enabling these features. There are also several technologies available that require wireless users to authenticate before accessing the network.
• Encrypt the data on your network - WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected Access) both encrypt information on wireless devices. However, WEP has a number of security issues that make it less effective than WPA, so you should specifically look for gear that supports encryption via WPA. Encrypting the data would prevent anyone who might be able to access your network from viewing your data .
• Protect your SSID - To avoid outsiders easily accessing your network, avoid publicizing your SSID. Consult your user documentation to see if you can change the default SSID to make it more difficult to guess.
• Install a firewall - While it is a good security practice to install a firewall on your network, you should also install a firewall directly on your wireless devices (a host-based firewall). Attackers who can directly tap into your wireless network may be able to circumvent your network firewall—a host-based firewall will add a layer of protection to the data on your computer
  

An Open Door To Your Home Wireless Internet Network Security?

This is not some new fangled techno-speak, it is a real tool to be used for the protection of your wireless internet network and LAN. African American SMBs have to realize that if your Internet connection is on 24/7 then your network, and it is a network that your computer is connected to, is at risk. Any business that uses the Internet to share or exchange information, news, or ideas with clients, vendors, partners, or other locations look in the reflection of your monitor and realize that your business is an unintentional (or intentional) target.

You should already be aware of all the thousands of bugs, viruses, denial of service attacks and other unfriendly items that lurk on the internet and virtually try attacking every second. It's like having a screen door on your most valuable assets. Let's not repeat what you know about, let's look at a larger picture that should concern everyone - the unknown. There are attacks that go unreported for various reasons, these are the ones that the major software and hardware vendors have no clue about and can only warn you after an attack is reported.

If your files, email, identity, client or product information are important to your african american business and you cannot afford a network being down for 24 hours. Then a firewall is what should be between the internet and everything else. You need to expect an intrusion if you have a small amount or no network protection. Hackers have tools that search the Internet 24/7 looking for a vunerable point to destroy. Overzealous marketers use similar tools to harvest information to use for spamming and unfortunately no one currently calls that a crime that we know as identity theft.

You have a deadbolt and a door lock on your front door and some even have a home security system in place. Why have a screen door latch on your home computer network, when you know there are people trying that door 24/7?

If you want to put a digital rottweiler between your home wireless network and hackers, marketers and other cyber-vandals then evaluate a strong firewall for your african american business.

Don't have the time or resources to get your home wireless network protected and need a african american Wireless Solution Provider partner to be there for you? We can help give you your freedom back...and a whole lot more. M.D.T.G.

Daviyd Peterson All Rights Reserved